2.Steam pressure (Mpa):0.5-0.8
4.Evaporation capaicty: 500~50000L/h
|Processing capacity:||Single effect :500-2000kg/Hr|
Three effect: 3600-15000kg/Hr
|Vacuum degree(MPA)||-0.04~ -0.09|
|Evaporation chamber volume(m³)||1.0||1.5||2.0||2.5|
|Liquid tank volume(m³)||0.3||0.5||0.8||1.0|
|Heating steam orifices(mm)||40||50||80||100|
|Cooling water enter and exit orifices(mm)||40||50||65||80|
It's applicable for dairy products, beverage,pharmacy, glucose,
starch,chemical industry, xylose, citric acid, ammonium sulfate,
biological engineering, environmental engineering and waste liquid
recovery and treatement. etc.
It consists of (first-effect, second-effect, third-effect)
separators and evaporators and preheaters,condenser and vaccum
pump, feeding pump,circulation pump, discharge pump, condensed
water pump and system pipe fittings, etc. Equiped wit CIP spraying
cleaning ball, vacuum gauge, thermometer,pressure gauge,and so on.
1. Material: SUS304 or SUS316L;
2.Full closed process, fast and low temperature evaporation;
3.Inside pipes are mirror polishing seamless sanitary pipes, so
material is not easy to paste on the pipe all, it's easy for
4.Low steam consumption: 1kg steam can evaporte 3.5kg water;
5.Low evaporation temperature:part of secondary steam can be
inhaled into single-effect heater through spray type hot pressure
pump, this would make full use of the heat and the evaporation
temperature is low.
6.Large concentration ratio: adopt falling film evaporation, which
make the material liquid with larger viscosity be easy to flow and
evaporate, hard to scale, short cocentration time, the
concentration ratio can reach to 1:5.
7.This equipment can realize automatic production, intellectual
system management, which is in conformity with GMP standard.
8.Can be desinged into different technological process according to
the different characteristics of the materials , also can according
to different users' requirements equip with automaticl control